News
How to Use Micro Powder mill?
Date:2016-06-13 06:01:04
Today we talk about the application method of Micro Powder mill, hoping it helpful to users, and in the use of the process make you can focus on improving the yield of products, and service life of Micro Powder mill.1, grinder and power units of Micro Powder mill should be installed securely. If the mill long-term fixed operations, it should be fixed on the basis of cement; if the Micro Powder mill is the mobile operation, the unit should be installed in the machine base made with angle iron, and ensure power machine (diesel or electric motor) and a pulley mill groove in the same plane of rotation.
2, shredders ministries after the installation to check the fasteners fastening of Micro Powder mill, if so loose to be tighten. At the same time you want to check the belt tightness is appropriate.
3, before Micro Powder mill starts rotating the rotor by hand, check the tooth claw hammer and rotor operation is flexible and reliable, with or without shell collision phenomenon, the direction of rotation of the rotor coincides with the machine direction of the arrow, and crushing power machine lubrication is good.
4, it should not replace the pulley to prevent excessive speed the grinding chamber of Micro Powder mill to produce an explosion, or low speed affect the efficiency of Micro Powder mill.
5, Micro Powder mill should start idle 2 ~ 3min, no abnormal phenomenon feeding after work.
6, worker should always pay attention to the functioning of the Micro Powder mill, feeding should be uniform, to prevent clogging boring car, do not overload work long hours. If there is vibration, noise, bearing and body temperature of Micro Powder mill is too high, out spray material and so on, should immediately stop inspection, troubleshooting before continuing to work.
Product List
